CABLE TESTER CT100

The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone ( 1 /4 ", 1 /8 ", TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LED's indicate proper shield connection and phantom power presence. The CT100 also offers an installed cable test mode and a continuity check plus a test tone generator.

ULTRA-DI DI100

With the DI100, you can rest assured that your sound source will reach your console balanced and noise-free. Go ahead and plug that guitar amp's speaker output into the ULTRA-DI - it'll deal with ratings of up to 3,000 Watts and give you a perfect signal at the other end. The input-buffering amplifier ensures clean, pure and powerful sound, even with extremely long cables. The DI100 also features our renowned OT-1 output transformer.

ULTRA-DI DI20

The ULTRA-DI DI20 is an innovative active 2-channel DI-box/splitter that takes the signal directly from an unbalanced high-impedance output - like an electric guitar - and feeds it directly into a mixing console or recorder. It is ideally suited to augment the traveling gear of musicians (especially guitar/bass players) as well as live/studio/broadcast engineers, installation contractors and studios/live event engineers.

ULTRA-DI PRO DI4000

The DI4000 gives you four first-class DI channels in one rack space. With two inputs (XLR and 1 /4 " TRS), a balanced output (XLR) and a 1 /4 " link output per channel, up to 40 dB of switchable input attenuation and up to 20 dB of gain, the DI4000 is equipped to deal with virtually any input signal, while our OT-1 output transformers ensure clean, powerful output.

ULTRA-DI DI400P

There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that'll corrupt the signal.

ULTRA-DI DI600P

There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that'll corrupt the signal.

ULTRA-DI PRO DI800

The ULTRA-DI PRO DI800 is a professional mains/phantom powered 8-channel DI-box. It converts unbalanced line inputs into balanced outputs, featuring optional mains or phantom powered operation. Its servo balanced operation assures ultra-flat frequency response. Additionally, it allows direct connection to speaker outputs with up to 3,000 Watts. A ground lift switch as well as input attenuation/gain per channel round off this powerful device.

FEEDBACK DESTROYER PRO DSP1124P

The DSP1124P locates feedback frequencies immediately and sets extremely narrow notch filters to "destroy" them, leaving the remainder of the signal virtually untouched. With its various modes you can master just about any live sound situation or use it as a creative sound-shaping tool with 24 bands of fully parametric equalization. Now with 24-bit A/D and D/A converters.

FEEDBACK DESTROYER PRO FBQ2496

The FBQ2496 is the fastest (>0.2 sec.) and the only 96 kHz Feedback Suppressor on the market. Using an ultra-fast feedback detection algorithm, it automatically and "intelligently" locates up to 20 feedback frequencies per channel and sets extremely narrow notch filters to "destroy" them, leaving the remainder of the signal virtually untouched. Easy does it: with the "Set-and-Forget" default setting plus the Panic button, your FEEDBACK DESTROYER can be up and running in no time!

MICROHD HD400

This ultra-compact 2-channel hum destroyer may be small in size, but there is nothing lacking in its performance. This super-compact solution removes AC hum and noise quickly, easily and reliably. Ground loops are safely broken while the highest sonic quality is maintained. Plus, the HD400 automatically converts unbalanced signals into balanced without any signal loss. The unit carries two 1/4' TRS inputs and outputs for 2 mono or 1 stereo signal.

MICROMON MA400

They say size matters, but sometimes size can be misleading. Under the hood of this small box you'll find the same technology that we use in our professional audio products.

MINIMON MON800

Get this ultra-compact monitor matrix mixer and you'll be glad you did. It features a dedicated input section with 4 selectable and mixable stereo inputs plus accurate 6-digit LED main stereo output meters for precise level indication.

MICROPHONO PP400

They say size matters, but sometimes size can be misleading. Under the hood of this small box you'll find the same technology that we use in our professional audio products.

MICROPOWER PS400

They say size matters, but sometimes size can be misleading. Under the hood of this small box you'll find the same technology that we use in our professional audio products.

ULTRAPATCH PX1000

The ULTRAPATCH PX1000 is a professional multi-functional 48-point balanced patchbay. Each channel can be aligned in 5 different modes, giving you the highest possible flexibility. There are fully balanced high-quality 1/4" TRS connectors, and the super-rugged metal construction assures long life and durability.

ULTRAPATCH PRO PX2000

The ULTRAPATCH PRO was conceived to offer the reliability and flexibility you need to connect your entire studio in a clear, orderly fashion. It can also be a godsend in more extensive live setups. With its four modes, easily selectable via topside switches, the PX2000's 24 jack pairs can operate in parallel, half normalized, normalized or open mode.

ULTRAPATCH PRO PX3000

Do you dread dismantling your stage after a gig because of all that cable mess? Have you ever tripped over an unsightly cable cluttering up the already tight space? BEHRINGER's ULTRAPATCH PRO PX3000 is just what you need. The PX3000 returns your attention where it should, to making music, by providing a solution to cable mess and clutter.

ULTRAMATCH PRO SRC2496

The ULTRAMATCH PRO SRC2496 is the successor of the renowned SRC2000, and enables you to transfer digital audio signals between devices with different sample rates, formats or interfaces and remove dropouts or jitter from digital media.